Make a straight dress More Versatile!

Hey y’all,

DSC_0102 - dress2 B4 - CopyI love those straight, sleeveless maxi dresses, but they’re just dresses…and can be worn only one way: as a dress. Duh! Lol.
As you might have guessed by now, I adore mixin’ it up—and layerin’ it up! Ya can’t do much with a dress to mix it up—unless you add a vest or jacket, a scarf or shawl—or…something.
Those of you who have been following DIY Bohemian for any length of time, know that I’m crazy about tunics…they’re so versatile! Many times, they can serve as a dress, also as a top over jeans or pants, or—depending on the tunic, over a short or long skirt!
Now, this gives ya something to work with!! 😀
So, today, I’m giving you four different ways to rev up your maxi, by “bohemian-izing” the hemline!!
Ok…let’s do it! 😀

tHiS IS an E-Z no-sew pROject!

……………………………………………………………

The first thing you have to do is: Lose your fear of scissors!!

500x500-pat-57-ad
Sweet Memories photo restoration

The second is: Don’t be afraid to rip up your clothes! Lol.
The thing about buying “thrifties” is: Hey—if you ruin something, at least, you didn’t pay much for it! However, if you put thought into your tearing up, you won’t make mistakes…and you’ll end up with something original. 🙂
So, get out your scissors!

#1

2017-03-24 DSC_0062 faerie dress tunic 1
EPSON scanner image
This one doesn’t require much planning—just start cuttin’!
I wanted this to be pixie-like. I thought of Tinkerbell and Peter Pan! 😀
After I cut zig-zaggy, I looked at what I’d cut off and thought: Hmmm…! A lightbulb moment! I used some of the cut-offs to make faerie “sleeves.” Just sew the flat side inside the top of the arm hole and let the zig-zags fall across your shoulders. It’s cute! I like it!!

……………………………………………………………

#2

2017-03-24 DSC_0067 braided fringe dress tunic 2
EPSON scanner image
This a tad more involved.
DSC_0114 - close up 1. dress2Decide how short you want your short side of the diagonal to be. Put a pin there. Also pin where you want the longest side to be— You’ll want fringe all the way across, so your bottom pin needs to be a few inches from the bottom of the dress.
This is how it’ll look (right).
To start, lay the dress out on a large table and get out your trusty yardstick.
DSC_0111 - close up1.dress2
DSC_0110 - close up2. dress2
Lay it across your dress from outer pin to outer pin.
Start putting pins all along the yardstick (above) until you have a diagonal line of pins across the front. Do the same for the back of the dress.
DSC_0112 - close up3. dress2Once you have your lines, start tearing strips by clipping the bottom edge of the hem, then tearing a strip up to your pins…to make fringe.
Now that you have diagonal fringe, begin to French braid the strips, adding strands as you braid…stringing on beads, irregularly—wherever it strikes you:
Start with three strands. As you braid, pull into the braid the next strip, then, the next, etc. till you’ve gone a short way, then braid it down, as a regular braid—putting in beads as desired. Then, grab another three strands, adding as you go—French braiding, for a short distance, then braid down again, etc., etc, till you have this (below). It doesn’t need to be exactly spaced… The more irregular, the better.
Then, stitch the ends several times to make them hold.
DSC_0118 - close up3. dress2
DSC_0115 - close up2. dress2

……………………………………………………………

#3

The next two are demonstrated on the same dress:
#3- Leave the fringe long, or
#4- cut it short, close to the “V.” I liked the long fringe, but had pictured in my mind a “V”-shaped hemline.
DSC_0057 - long fringe dress tunic 3A
EPSON scanner image
Do the same here, as discussed in #2, using a yardstick and pins to create your lines.
But, first, fold the dress vertically to find the center of the front, and of the back. Place pins to mark the centers at the bottom of the hem.
Determine your shortest point on the sides, mark it with a pin on each side seam.
DSC_0052 - pin a lineLay out the dress. Get your yardstick and make two lines of pins, each from one side, then the other, diagonally, down to the center pin, making a “V” on front and back.
Tear strips from the bottom up to the pins. On each fringe strip, tie a half knot close to the “V.”
It you’ve chosen to leave the fringe long, you’re finished.
If you want the pronounced “V” line, go to #4.

……………………………………………………..

#4

2017-03-24 DSC_0075 dress tunic 3B
EPSON scanner image
Follow the steps for #3.
Then, simply clip the fringe strands a couple of inches below the half knot, all the way around.
That’s it! 😀
Enjoy any of these unique “hemlines” (not hemmed, per se— the edges are left raw) with pants, jeans or a skirt—or, use as a dress, each with its own “bohemian-ization!” ❤

……………………………………………………..

Please “like” and “share” on Facebook, Twitter, Pinterest, etc. using the buttons below.
I’d love to hear your comments!!! Lemme know whatcha think!

Return to Tutorials for Tops.

Return to all Tutorials.

4 Replies to “Make a straight dress More Versatile!”

    1. Hey Christina, thanks for stopping by!I appreciate your comment. 🙂

      My site is full of ways to refashion and upcycle manufactured clothes.

      I love ways in which I can create something that’s all my own without starting from scratch!—and, the cost is very minimum. This way, we get twice blessed!

      Visit my Tuts-n-Tips for more fun remakes!

      THANK YOU!
      Blessings,
      Cindy

Leave a Reply

Your email address will not be published. Required fields are marked *